Tech-BondTM
Products
Blue and Black Bonding Agents
Tech-BondTM Blue (Standard Viscosity) and/or Tech-BondTM Black (Thick Viscosity) work with porous and non-porous materials, natural and man-made.  A brief list of the materials that can be easily and quickly bonded includes: metals, wood, rubber, porcelain, china, fabric, paper, leather, etc.
NOTE: Both Bonding Agents are clear, dry clear and will not yellow with age.

Polyolefin Plastics
Our adhesion promoter, the Plastic Prep Solution, will bond the polyolefin family of plastics; polypropylene, polyethylene & poly-urethane ... quickly, easily and PERMANENTLY!. 
,,, AND our Plastic Prep Solution will allow you to bond not only the polyolefin family of plastics, but also UHMW's, Teflon, Delrin, nylon, and silicon compounds.  

Activator/Accelerator (AA) 
Tech-Bond's Activator/ Accelerator is designed to work with Tech-BondTM Bonding Agents.  Use of the Activator/ Accelerator will cause the Bonding Agent to set within seconds and for that bond to reach operational strength in minutes.  Operational strength being defined as ninety percent of full strength.  Use of the Activator/Accelerator is recommended with porous materials, plastics and/or when cross-bonding different materials.  Please read the instructions that come with the Tech-BondTM System on using the Activator/Accelerator. 

Debonder/Cleaner
There are two ways to "clean" a Tech-BondTM join.  The first way is to use Acetone, which can be easily purchased in hardware stores or as nail polish remover. 
The better way to remove super-glue or our Bonding Agents is to use Tech-Bond's Debonder/ Cleaner, which dissolves Tech-BondTM Bonding Agents (and super glues) on contact, usually without any damage to the underlying surface, including; skin, fabric, metal, wood, leather, etc.

Please test the Debonder/ Cleaner on the material(s) before using to make sure that the Debonder/ Cleaner does not cause damage to the material. 

FILLER
Tech-Bond's Filler is a silica sand compound that can be used to fill cracks, gaps and holes.  The FILLER also adds vital surface area and can be sanded and painted.  Our FILLER is a critical component of a bonding solution system.

SHIPPING
Orders will be shipped next business day.  Because orders have to go by ground (due to the composition of the materials being shipped) most order will be sent UPS.  The shipping charges are designed to offset most, but not all, of the actual cost.  Tech-Bond Solutions will absorb the shortfall.

NO HASSLE RETURN POLICY

If there is a problem of any kind, or you are dissatisfied with any Tech-Bond product within the first thirty days after purchase, return the product for a 100% refund, or, if desired, a replacement.

SHIPPING CHARGES
Order Cost             Shipping Cost

     0 - $   40                    $  7.95 
 $ 40 - $   75                    $  8.95
 $75 - $ 200                    $  9.95  
Above $200                         0

A surcharge may be added for delivery to a residential address or to a remote location in the United States. 

If a surcharge is added, the total of the shipping charges and any surcharge will not exceed the total fee charged by UPS.

Endorsements

"Best type of CA or adhesive I've ever used. 
It sets up fast & holds tremendously.  It does
what they say it does."
Jim Powers
Model Engineer
RC Airplane Builder
Tennessee

"Being the cynical person that I am, I purchased the smallest tube possible.  I have since purchased the full-sized black bonding agent.  This glue even fixed a bra clamp!  Nothing I have ever purchased has worked this well.  It is by far the best glue ever made. "
 K. Nally
Received 7/16/08

"Your product is amazing ..."
William H. "Bud" Moore
TCA #79-13379

"Use Tech-Bond once
and you're a customer for life."
Julie Allison
Domestic Engineer
Columbus, Ohio

 " ... used the glue and it works great.  The plane I used it on  was totaled (if you listened to my fellow flyers). Thank you for a great product."
George H. Robinson
Highland, New York

"Thank you for your excellent service in this matter."
George Cataldo
Ontario, New York

"It does what they say
it does ... fast-acting and better than super-glue.  You don't have to worry about it coming apart." 
Jacob Washburn 
Farley Estes & Dowdle Funeral Home

"I bought some of the
blue and black glues
at the last World Show (Springfield, IL 2005).   Please let me know if you can help – I desperately need some (Tech-Bond) for repairing a ..."
Emily Mayer – Sculptor
Flying Bear Taxidermy
Received May, 2007

Comments heard at trade shows

"What I like best is that I can walk back to the storeroom and know that the glue won't be hard in the bottle."
Master Taxidermist
2007 NTA Annual Convention
Louisville, Kentucky

"I put on the landing gear on my flyer with Tech-Bond. 
The landing gear survived
a crash intact. " 
RC flyer
2007 D.O.G.S. Show
Dayton, Ohio

Pin Cap & Nozzle
Tech-Bond.net LLC uses the most advanced system available, the pin cap and nozzle, to deliver our bonding agents.  With reasonable care, the bonding agents will not clog in the nozzle, crust up in the nozzle or harden in the well. 
Care
Aggressively wipe off the nozzle after each use.  If there is dried residue on the outside of the nozzle, use pliers to twist the residue from the nozzle.  When putting on the pin cap, don't over-tighten, turn cap till first resistance is felt.  
Free cap and nozzle available
If you run into problems with your cap and nozzle, Tech-Bond.net LLC will send you a spare cap and nozzle free by simply emailing info@tech-bond.net and requesting a cap and nozzle.  Please give name address and phone number.  Tech-Bond Solutions wants to ensure that you receive full value on your Tech-BondTM purchase.   
If you do have to replace your cap and nozzle, soak the old cap and nozzle in acetone for several days.  That immersion will remove the old bonding agent and you can reuse the cap and nozzle.

INDUSTRIES SERVED

A complete set of instructions to meet your specific bonding 
challenges is available.

Industries:
- Automotive 
- Funeral Home Industry
- Plastics, Poly-plastics
  and UHMW's
- Handyman/Maintenance
- Model Engineering
- Piano Technicians
- RC Models
- Taxidermy (Wet & Dry
   Tan repair)
- Woodworking

Email info@tech-bond.net and request the set of instructions for your  industry/need.