Testimonials

Tech-Bond Solutions
"When performance is a must!"

Testimonials on using Tech-Bond’s Poly Prep and Bonding Agents to bond those "unglueable" polymers.

Hi To My Plastic Glue Problem Solving Hero,

Well, I used your Tech-bond product on my broken plastic door panel clip holders and it worked great! I think the molecularly bonded or glued parts are now stronger than the original clip holders before they were broken. So thank you for solving my gluing problem. I have told lots of my friends and neighbors that if they have a problem gluing broken plastic or polypropylene things, to buy your product.

Thanks,

Arthur Rendell
Note: The cup holders are not stronger, but will withstand all normal wear and last virtually forever.

From Myung J. Stewart on the repair of her hyperbaric chamber (hyperbaric chambers are made with a poly.)

"Tech-Bond really works. It is a fantastic glue. Anyone who wants to fix a pressurized container, this (Tech-Bond) is it."

"This Stuff Works"

Hi Tech-Bond,
I used your kit to repair the plastic gas tank on my 2001 Audi and it worked great! I used a patch made out of a piece of HDPE from a rose food jug. Using the spray primer and following the instructions that patch is stuck tight. I tired to pull it off but it's there for good.
Thanks again for saving me several hundred bucks.
Bob Buch
Concord, NC

From Power Probe, a California manufacturer serving the automotive industry, who is using Tech-Bond's Poly Prep and Tech-Bond Black, out thicker viscosity structural adhesive.

"Our clients are calling us and telling us that they've never seen a product perform the way Tech-Bond does."
                                                                                                                    Wayne
                                                                                                                    Powe Probe

As you use our Poly Prep and Bonding Agents, please send us your success stories ... and pictures if possible.

Click on the link below to purchase one of the kits that will allow you to do the polymers.

http://shop.tech-bond.net/product.sc;jsessionid=70C5577C49174BD12E1198BAC2ACBA90.qscstrfrnt02?productId=25&categoryId=1

If you have any further questions please call 877 565 7225.

Main Navigation